Hordozható erdőtűzoltó szivattyú (sorozatkapcsolható) Centrifugálszivattyú
JBQ5.0/2
Kapcsolatfelvétel a vásárláshoz
Termékleírások
1. Material Inspection: Pump head and component materials: Pump casing made of corrosion-resistant treated aluminum alloy; impeller constructed from wear-resistant, corrosion-resistant aluminum alloy; other parts fabricated from wear-resistant, corrosion-resistant materials such as aluminum alloy, stainless steel, and copper.
▲2. The pump assembly consists of a single-stage centrifugal pump body integrated with a four-stroke single-cylinder air-cooled gasoline engine. It can be operated either handheld or backpack-mounted. The pump body and engine feature a direct-connect integrated linkage.
▲3. Engine nameplate specifies power ≥2HP/7000rpm, displacement ≥48cc (ml), built-in fuel tank capacity ≥1.3L, and transistor ignition system.
4. Starting Method: Self-retracting recoil starter or push-button electric start.
5. Portable design allows for hand-carrying or backpacking. The pump frame is integrated with the pump body.
6. Inlet diameter: 2“ BSP male thread (50mm); Outlet diameter: 1.5” BSP male thread (40mm). Includes 3/8“, 1/4”, and fan-shaped three-hole integrated spray guns.
7. Positions posing safety hazards to operators must display prominent warning and caution labels.
8. Pump units support direct series, parallel, or series-parallel configurations.
▲9. Net weight: 15kg.
▲10. Priming method: Manual vacuum diaphragm priming. Priming pump integrated with pump body. Diaphragm diameter ≥100mm, thickness ≥2.5mm. Entire assembly (excluding diaphragm) constructed of synthetic resin.
▲11. Equipment dimensions: ≤395×320×420mm
12. Sealing test: The pump shall undergo sealing tests per Clause 10.5 of GB 6245-2006. No leakage, sweating, or defects shall occur on the pump body or components during testing.
13. Hydraulic pressure test: The pump shall undergo strength testing at 0.5MPa for 40 hours. After testing, the pump shall start normally with all parameters within specifications.
▲14. Continuous Operation Performance: After filling with oil, full-load operation time ≥90 minutes; with the outlet closed, the pump should operate at high speed for over 30 minutes.
15. Lateral and Longitudinal Tilt Test: The pump assembly should function normally under lateral and longitudinal tilts of 15°.
16. Performance Testing:
Condition 1: Pressure 0.3MPa, Flow ≥2.7L/s; Pressure 0.6MPa, Flow ≥2.4L/s
17. Maximum Pressure (Zero Flow) ≥1.0MPa
▲18. Maximum Head ≥102m
▲19. Maximum Flow (Zero Pressure): ≥4.5L/s
20. Maximum Throw Distance: ≥25m
21. Maximum Suction Lift: ≥7m
▲22. Start-up Time: ≤4s
▲23. Priming Time: ≤5s
24. Maximum Priming Vacuum: ≥85kPa
▲25. Priming Vacuum Seal Performance: ≤0.8kPa
▲26. Ear-Level Noise: ≤97dB(A)
Alkalmazási forgatókönyvek
A nagy emelésű vízszivattyúk kifejezetten az erdei tűzoltás vízellátási forgatókönyveihez tervezett nyomásnövelő eszközök. Fő funkciójuk a tűzoltóvíz gyors és stabil szállítása a helyszínre, amikor a vízforrás nyomása nem elegendő, többfokozatú centrifugálszivattyúkkal növelik a nyomást, és megfelelnek a tűzoltórendszerek nagynyomású igényeinek. Ez a termék alkalmas erdőtűzoltási és vészhelyzeti mentési műveletekhez, és tűzoltóautókkal párosítva gyorsan létrehozható hosszú távú vízellátó vonalak.
Kulcsfontosságú értékesítési pontok
I. Adaptability to Extreme Field Environments
II. Core Emergency Fire Suppression Performance
III. Durability, Ease of Maintenance + Safety Assurance
IV. Compliance and Practical Additional Benefits